Details

Type: Multi-Function Packaging Machine
Condition: New
Function: Embossing, Filling, Sealing, Wrapping
Application: Food
Packaging Type: Bags, Film, Foil, Pouch
Packaging Material: Plastic
Automatic Grade: Automatic
Driven Type: Pneumatic
Voltage: 220V 50/60Hz
Power: 3.5kw
Dimension(L*W*H): (L)1400 X (W)1060 X (H)2300mm
Certification: CE Certification
Machine type: Multi-Function packaging machines
Model Number: KST-18II
After-sales Service Provided: Engineers available to service machinery overseas

Crafting process:

Screwing conveyor → Auger head → Vertical packing machine → Finished bag conveyor

Technical Parameters:

l Product: powder products
l Packing size: W 80~200mm, L 80~300mm
l Production capacity: 30~35 bags / min
l Measurement accuracy: ±1%g
l Compressed air consumption: about 0.5 cubic / minute 0.6-0.7Mpa
l Total power: 6.0KW (not including metal detection and self-owned equipment and other factory auxiliary equipment)

Application:

This production line is in accordance with the conventional bagging process configuration, the entire production process a high degree of automation, in line with China GMP health standards;

Introduction the production line:

l The production line supporting machinery in addition to marked materials are stainless steel, all machine structures are in accordance with food hygiene standards selected design;
l The material contact with the container material are food grade SUS304;
l Often dismantling the structure are easy to dismantle the connection, to ensure that the shift or change the product when dealing with health convenience;
l The production line of the normal production needs 1-2 employees.

Operation and adjustment

1. The requirements of operating this machine: Put through the elec. Power and cleaned compressed air, put the shell of the machine safely to the ground, set up the total work pressure as 0.6 Mpa,
And pour into lubrication positions and cylinder lubrication( we suggest that cylinder pour into pure white
Oil).
2. Put the packing materials in the film scroll and fix the shelter (the printed-page outward or the compound page inward). Penetrate the packing materials according to picture of the film's locus.
3. Press the electrical switch in the electricity operation board, the indicator light is turned on, then the machine begin in the state of awaiting an opportunity. Version indicator showed as follows:
4. According to the packing materials pass the temperature controller of the board to set up trial sealing temperature.
The temperature set up method of the temperature controller: Press key in the temperature controller to set up, made the PL window indicates words "50", SV window unit twinkle, then press keyor
5. Examine the situation of the packing materials, to see whether the packing materials is in the obverse side of the finished-form machine, if not, then you need to adjust from left, right, above and below; Or adjust the axle position of the packing materials in the film scroll, made the two-wheel pull the packing materials easily.

Related Products

, ,